Multitech LoRa 915MHz mCard for Multiconnect Conduit Gateway - SPI interface

P.S No Antenna included

MTAC-LORA

The MTAC-LoRa accessory card provides long range RF support using Semtech’s LoRa radio technology. The Conduit gateway uses this accessory card to connect MultiTech’s mDot products to the cloud.

MTAC-LoRa Mechanical Drawing

MTAC-LoRa Hardware Specifications

The following are the hardware specifications for the MTAC-LoRA accessory card.

Category	Description
Physical Description
Weight	TBD
Dimensions	3.650″ x 1.375″ (92 mm x 34.925 mm)
Power Requirements
Operating Voltage	5 VDC and 3.3 VDC +/- 10%
Environment
Operating Environment	-30° to +70° C ¹ when operated in a Conduit gateway device (MTCDT).
Storage Environment	-40° to +85° C
Relative Humidity	20% to 90% non-condensing
Certifications and Compliance
EMC Compliance	EN 301 489-03 V1.6.1:2013
	EN 300 220-2 V2.4.1:2012
	RSS-210:2010
	FCC 15.247:2015
	FCC 15.109:2015
	FCC 15.109(g):2015
	FCC 15.107:2015
	ICES-003:2012
	EN 61000-3-3:2013
	EN 61000-3-2:2006 (Amended by A1:2009 and A2:2009)
	EN 55022:2010
Safety Compliance	UL 60950-1 2nd ED
	cUL 60950-1 2nd ED
	UL 201
	IEC 60950-1 2nd Ed. Am.1 and Am.2

MTAC-LoRa Power Draw

Voltage	Typical Power – No Connection (Amps)	Typical Power w/Ethernet Cable Attached (Amps)	Max Power – Passing Data Stream (Amps)	Total Inrush Charge Duration During Power Up (mSec)	Total Inrush Charge in MilliCoulombs (mC)
9.0 Volts	0.607	0.624	0.633	8.47	5.22
20.0 Volts	0.300	0.306	0.309	17.4	3.84
32.0 Volts	0.206	0.208	0.209	31.4	4.80

Datasheet: QuickStart.pdf

MTAC-LORA-H-915 - Multitech LoRa 915MHz mCard for Conduit (SPI Interface)