Switching Power Supply AC adapter

Power Plug Pack 60W 2.5A 24V

Come with AU blade.

GTM-91099-6019 is a 60w (Watt) Wall Plug In Globally Certified and Approved LPS Class I or Class II Desktop Power supply in medical grade with Level V efficiency.

Class II: North America/Japan/China Nema 1-15P, Europe CEE7/16, Australia/New Zealand AS/NZ3112, United Kingdom BS1363
Class I: North America/Japan/China Nema 5-15P, Europe CEE7/7 Schuko, Australia/New Zealand AS/NZ3112, United Kingdom BS1363

This power supply features Regulated output with very low ripple, Built-in over current, Short circuit, Over current, and thermal protection as well as low leakage, low ripple, and high efficiency. The product is suitable for most applications requiring DC power and common applications include medical devices, portable medical treatment and monitoring equipment and instruments, Hospital equipment and fixtures, equipment, and as a power source for Li-Ion battery chargers.

Specifications

Item #:	GTM-91099-6024
Item Name:	Regulated Switchmode AC-DC (R) GTM-91099-T3
Datasheet	GTM91099.pdf
DC Plug	DC plug: 5.5 x 2.5 x 11mm Center (+)
Electrical Specifications
Rated Output Power:	0 to 60 W
AC Input Voltage:	100 to 240 V, 50-60Hz
Input Current:	Up to 1.5 rms
Inrush Current:	40A max at cold start 120 VAC, 60A max cold start 230VAC
Output Current:	0 to 2.5 A
DC Output Voltage:	+24.00 V
Turn On / Turn Off Overshoot:	5% max, 500uS max recovery time for 25% to 50% step load
Turn-On Delay (Typical):	2 Seconds, maximum @ full load, nominal line
Hold-Up Time:	8 ms typical at nominal input voltage and full load
Output Ripple Voltage (Peak To Peak):	+/-1% or 150mV whichever is greather at nominal output voltage. Measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector.
Line Voltage Regulation:	+/- 2% max at full load
Output Regulation (Line/Load):	5% for main output, measured at O/P connector
Switching Frequency(Typical):	100 kHz
Protection
Over-Voltage:	Protected, Hiccup with auto recovery
Short Circuit:	Protected, Hiccup with auto recovery
Over-load:	Protected, Hiccup with auto recovery
Input Protection:	Input line and neutral fusing
Means of Patient Protection:	(2 x MOPP)
SAFETY
Dielectric Withstand Voltage:	5656Vdc from primary to secondary
Earth Leakage Current:	N/A for Class II units, there is no PE Ground pin, so Earth Leakage current is not measured
Touch Current:	Maximum allowed values: 100uA NC(Normal condition) 500uA SFC(single fault condition)
Bridging Capacitor:	(2) * Y1 type capacitors in series
OTHER
MTBF:	200,000 Hours @ 25°C ambient temperature
Operating Temperature:	0°C to 40°C ambient temperature
Humidity:	0% to 90% relative humidity
Storage Temperature:	-10°C to 80°C
Cooling:	Convection
ENCLOSURE
Housing:	High impact plastic, 94V0 polycarbonate, non-vented
Size:	117.5353.4736.6 mm +/- 1.0
Markings:	Label and/or Pad Printed and/or Molded into Case
LED:	Standard Green color to indicate power on
SAFETY APPROVAL:	UL60601-1 3RD ED, CUL TO 22.2 #60601-1, NEMKO TO 60601-1, CCC TO GB4943-2001, GB9254-1998, GB17625.12003, GOST-R, CE CLASS II, AS/NZ TO 60950 WITH RCM, C-TICK TO 55022, PSE TO J60950, CB REPORT
EMI:	COMPLIES WITH EN55011 CLASS B AND FCC PART 15 CLASS B, VCCI WHEN TESTED WITH RESISTIVE LOAD, BOTH CONDUCTED AND RADIATED EMI
CE MARK:	TESTED TO COMPLY WITH EN55011:1998_A1:1999/A2:2002, EN610003-2, EN610003-3 INCLUDING EN60601-1-2 10/2006, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11
C-TICK:	TESTED TO COMPLY WITH AUSTRALIA SECTION 182 OF THE RADIO COMMUNICATION ACT OF 1992.
EFFICIENCY:	ENERGY STAR VERSION 2.0, LEVEL V
	COMPLIES TO SECTION 301 OF THE ENERGY INDEPENDENCE
	AND SECURITY ACT (EISA)
	CECP TIER 2 (CHINA), MEPS TIER 2 (AUSTRALIA), CODE OF
	CONDUCT (EUROPE)

Temperature Derating Curve

GTM-91099-6024 - Globtek 24V 2.5A 60W Plug pack with AU blade