Sku: UD1100IA2-01

AUD$539.25
Availability: Many In Stock
Sku: UD1100IA2-01
Ethernet
Lantronix

UDS1100-IAP

External Device Server

  • In minutes, securely connect factory floor devices to enterprise systems
  • Access, monitor and control equipment over Ethernet
  • Replace dedicated PCs and/or modem lines with fast and reliable Ethernet networking
  • Supports RS-232, RS-422 and RS-485 communications
  • Includes Modbus TCP, ASCII, RTU and DF1 protocols
  • 15kV serial ESD protection
  • Wide -40°– 70°C operating temperature range
  • Environmentally-friendly RoHS and WEEE-compliant

 

Documentation

 

Firmware / Utilities

 

Features & Specifications

Serial Interface
Interface Software-selectable RS232, RS422 or RS485 (2 and 4 wire support)
Connectors 1 DB25F DCE serial port
Data Rates Software-selectable baud rate from 300 to 230 KBaud
Characters 7 or 8 data bits
Parity odd, even, none
Stop Bits 1 or 2
Control Signals CTS/RTS (Hardware)
Flow Control XON/XOFF (Software)
Network Interface
Interface 10Base-T/100Base-TX Ethernet port
  • Software selectable Ethernet speed 10/100/Auto
  • Software selectable Half/Full/Auto duplex
Connector RJ45
Standards ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP, and Telnet, TFTP
Indicators (LED)
  • Power (green)
  • 10/100 Mb Link (amber/green)
  • 10/100 Activity (amber/green)
  • Diagnostics (red)
  • Status (green)
Processor
CPU Lantronix DSTNI-EX 48 MHz clock
Memory 256 KB zero wait state SRAM, 2 MB Flash
Management
  • Lantronix DeviceInstaller GUI, Serial login, SNMP, Telnet login, HTTP
Power
  • 9-30 VDC or 9-24 VAC on barrel connector (1.5 Watts maximum consumption)
  • 9-30 VDC on DB25F serial interface
  • 3.3 VDC on serial interface
Environmental
Operating -40° to 70° C (-40° to 158° F)
Storage -40° to 85° C (-40 to 185° F)
Packaging
Material Metal enclosure with integrated wall mounts; optional 35 mm DIN-rail mount available
Dimensions (LxWxH) 9.0 x 6.4 x 2.3 cm (3.5 x 2.5 x 0.9 in)
Weight 0.20 kg (0.45 lb)
IP Rating 30
Agency Approvals
  • UL, CSA, FCC, CE, TUV, CTick, VCCI
Shipping Dimensions
Dimensions (LxWxH) 24.2 x 19.1 x 11.5 cm (9.5 x 7.5 x 4.5 in)
Weight 1.5 kg (3.0 lbs)
Included Software
  • Windows® 98/ME/NT/2000/XP-based DeviceInstaller configuration software, Com Port Redirector™ software and related utilities
Emissions
FCC Part 15 Subpart B Class A Radiated Emissions 30MHz – 1000MHz
ICES-003 Issue 4 February 2004 Class A Radiated Emissions 30MHz – 1000MHz
AS/NZS CISPR 22: 2004 Class A Radiated Emissions 30MHz – 1000MHz
EN55022: 1998 + A1: 2000 + A2: 2003 Class A Radiated Emissions 30MHz – 1000MHz
VCCI V-3/2005.04 Class A Radiated Emissions 30MHz – 1000MHz
EN61000-3-2: 2000 Class A Harmonic Current Emissions
EN61000-3-3: 1995 + A1: 2001 Fluctuations and Flicker
Immunity
EN55024: 1998 +A1: 2001 +A2: 2003
IEC_61000-4-2: 1995 ESD 8kV Air Discharge (Direct), 4kV Contact Discharge (Direct/Indirect)
IEC_61000-4-3: 1995 Radiated Immunity 3.0V/m, 1KHz AM Sine Wave at 80%
IEC_61000-4-4: 1995 EFT/Burst 1.0kV Power Lines, 0.5kV I/O Lines
IEC_61000-4-5: 1995 Surge Immunity 1.0kV Common Mode, 1.0 kV Differential Mode
IEC_61000-4-6: 1996 Conducted Immunity 3.0 Vrms, 80% AM Modulated (1KHz)
IEC_61000-4-8: 1993 Magnetic Field Immunity 50Hz 1.0 Arms/m
IEC_61000-4-11: 1994 Voltage Dips and Interrupts (>95%,0.5 periods), (30%,25 periods), (>95%,250 periods)
Isolation
  • Designed with protection against transients and ESD for use under harsh environments.
Serial Port 15 kV ESD protection on RS232 and RS422/485 transceivers
Power Input Up to non-repeated 600 W 10/100 usec pulse protection against transient over voltages
Ethernet Port 1500 VAC isolation shielded with shield connected to chassis ground for signal integrity and ESD protection

 

UD1100IA2-01 - Lantronix UDS1100 IAP Industrial serial-to-Ethernet devices Server

Sku: UD1100IA2-01

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page