Sku: MTAC-LORA-H-915

AUD$385.61
Availability: Many In Stock
Sku: MTAC-LORA-H-915
LoRawan
MULTI-TECH SYSTEM INC

Multitech LoRa 915MHz mCard for Multiconnect Conduit Gateway - SPI interface

P.S No Antenna included

 

 

MTAC-LORA

The MTAC-LoRa accessory card provides long range RF support using Semtech’s LoRa radio technology. The Conduit gateway uses this accessory card to connect MultiTech’s mDot products to the cloud.

 

MTAC-LoRa Mechanical Drawing

 

MTAC-LoRa Hardware Specifications

The following are the hardware specifications for the MTAC-LoRA accessory card.

Category Description
Physical Description
Weight TBD
Dimensions 3.650″ x 1.375″ (92 mm x 34.925 mm)
Power Requirements
Operating Voltage 5 VDC and 3.3 VDC +/- 10%
Environment
Operating Environment -30° to +70° C 1 when
operated in a Conduit gateway device (MTCDT).
Storage Environment -40° to +85° C
Relative Humidity 20% to 90% non-condensing
Certifications and Compliance
EMC Compliance EN 301 489-03 V1.6.1:2013
EN 300 220-2 V2.4.1:2012
RSS-210:2010
FCC 15.247:2015
FCC 15.109:2015
FCC 15.109(g):2015
FCC 15.107:2015
ICES-003:2012
EN 61000-3-3:2013
EN 61000-3-2:2006 (Amended by A1:2009 and A2:2009)
EN 55022:2010
Safety Compliance UL 60950-1 2nd ED
cUL 60950-1 2nd ED
UL 201
IEC 60950-1 2nd Ed. Am.1 and Am.2

MTAC-LoRa Power Draw

Voltage Typical Power – No Connection (Amps) Typical Power w/Ethernet Cable Attached (Amps) Max Power – Passing Data Stream (Amps) Total Inrush Charge Duration During Power Up (mSec) Total Inrush Charge in MilliCoulombs (mC)
9.0 Volts 0.607 0.624 0.633 8.47 5.22
20.0 Volts 0.300 0.306 0.309 17.4 3.84
32.0 Volts 0.206 0.208 0.209 31.4 4.80

 

Datasheet:           QuickStart.pdf

 

MTAC-LORA-H-915 - Multitech LoRa 915MHz mCard for Conduit (SPI Interface)

Sku: MTAC-LORA-H-915

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page